93LC46/P Microchip Technology IC EEPROM 1KBIT 1MHZ 8DIP
Интегральные схемы (ИС) 8-DIP (0.300", 7.62mm)
Номер производителя:
93LC46/P
Производитель:
Категория продукции:
Описание:
IC EEPROM 1KBIT 1MHZ 8DIP
Состояние RoHs:
Без свинца / в соответствии с RoHS Таблицы данных:
93LC46/P Таблицы данных(PDF)
Access Time :
-
Clock Frequency :
2MHz
Memory Format :
EEPROM
Memory Interface :
SPI
Memory Size :
1Kb (128 x 8, 64 x 16)
Memory Type :
Non-Volatile
Mounting Type :
Through Hole
Operating Temperature :
0°C ~ 70°C (TA)
Package / Case :
8-DIP (0.300", 7.62mm)
Packaging :
Tube
Part Status :
Active
Series :
-
Supplier Device Package :
8-PDIP
Technology :
EEPROM
Voltage - Supply :
2.5 V ~ 5.5 V
Write Cycle Time - Word, Page :
10ms
в наличии
14,905
Unit Price:
Свяжитесь с нами
Предложение
93LC46/P Конкурентные цены
ChipIc имеет уникальный источник поставок. Мы можем предложить 93LC46/P более
конкурентоспособную цену для наших клиентов. Вы можете насладиться нашим лучшим
сервисом, купив ChipIc 93LC46/P. Пожалуйста, не стесняйтесь обращаться по поводу
лучшей цены на 93LC46/P. Нажмите, чтобы получить предложение
93LC46/P Особенности
93LC46/P is produced by Microchip Technology, belongs to объем памяти, and its best working temperature is 0°C ~ 70°C (TA), the size is 8-DIP (0.300", 7.62mm), and Tube is its most common packaging method, which belongs to the - series, using 8-PDIP, 2.5 V ~ 5.5 V is the most suitable voltage.
93LC46/P Подробная информация о продукции
:
93LC46/P — это объем памяти, буферные усилители, разработанные и
произведенные
Microchip Technology.
93LC46/P производства Microchip Technology можно приобрести на сайте CHIPMLCC.
Здесь вы можете найти различные виды электронных деталей от ведущих производителей мира.
93LC46/P компании CHIPMLCC прошел строгий контроль качества и соответствует всем требованиям.
Статус запасов, отмеченный на CHIPMLCC, предназначен только для справки.
Если вы не нашли запчасть, которую ищете, вы можете связаться с нами для получения дополнительной информации, такой как количество запасов в таблице данных 93LC46/P (PDF), цена 93LC46/P, Распиновка 93LC46/P, руководство 93LC46/P и решение на замену 93LC46/P.
93LC46/P производства Microchip Technology можно приобрести на сайте CHIPMLCC.
Здесь вы можете найти различные виды электронных деталей от ведущих производителей мира.
93LC46/P компании CHIPMLCC прошел строгий контроль качества и соответствует всем требованиям.
Статус запасов, отмеченный на CHIPMLCC, предназначен только для справки.
Если вы не нашли запчасть, которую ищете, вы можете связаться с нами для получения дополнительной информации, такой как количество запасов в таблице данных 93LC46/P (PDF), цена 93LC46/P, Распиновка 93LC46/P, руководство 93LC46/P и решение на замену 93LC46/P.
93LC46/P FAQ
:
1. What is the function of the 93LC46/P semiconductor?
The 93LC46/P semiconductor is a 1K-bit low-voltage serial electrically erasable programmable read-only memory (EEPROM) device. It is commonly used for storing small amounts of non-volatile data in various electronic applications.
2. What are the key features of the 93LC46/P semiconductor?
The 93LC46/P semiconductor features a wide operating voltage range, low power consumption, and a simple two-wire serial interface. Additionally, it offers a high-speed clock frequency and a dedicated write protect pin for added security.
3. How is the 93LC46/P semiconductor typically connected in a circuit?
The 93LC46/P semiconductor is usually connected to a microcontroller or other digital device using a simple two-wire serial interface, consisting of a clock line and a data line. Additionally, it requires connections for power and ground, as well as a write protect pin if needed.
4. What are the typical applications of the 93LC46/P semiconductor?
The 93LC46/P semiconductor is commonly used in applications requiring small amounts of non-volatile memory, such as storing configuration data, calibration values, or user settings in various electronic devices including consumer electronics, automotive systems, and industrial equipment.
5. What are the main advantages of using the 93LC46/P semiconductor in a design?
The 93LC46/P semiconductor offers advantages such as low power consumption, small form factor, ease of integration with microcontrollers, and reliable non-volatile data storage. Its simple two-wire serial interface also simplifies the design of the overall system.
6. How does the 93LC46/P semiconductor handle data retention and endurance?
The 93LC46/P semiconductor is designed to retain data for an extended period without requiring power. Additionally, it has a high endurance for read and write cycles, making it suitable for frequent data updates in various applications.
7. What are the typical operating conditions for the 93LC46/P semiconductor?
The 93LC46/P semiconductor operates within a specified voltage range, typically from 2.5V to 5.5V, and at a recommended temperature range. It is important to adhere to these operating conditions to ensure proper functionality and reliability.
8. Can the 93LC46/P semiconductor be used in automotive applications?
Yes, the 93LC46/P semiconductor is suitable for use in automotive applications, provided that it meets the required specifications for temperature, voltage, and environmental conditions. Its small form factor and low power consumption make it well-suited for automotive electronics.
9. How can the 93LC46/P semiconductor be programmed and erased?
The 93LC46/P semiconductor can be programmed and erased using a simple two-wire serial interface, which allows for easy integration with microcontrollers or other digital devices. Specific commands and protocols are used to write, read, and erase data in the semiconductor.
10. Are there any special considerations for PCB layout when using the 93LC46/P semiconductor?
When designing the PCB layout for the 93LC46/P semiconductor, it is important to consider signal integrity, power supply decoupling, and proper routing of the serial interface lines to minimize noise and interference. Additionally, attention should be given to the placement of the semiconductor within the overall system for optimal performance.
I hope this information is helpful to you.
The 93LC46/P semiconductor is a 1K-bit low-voltage serial electrically erasable programmable read-only memory (EEPROM) device. It is commonly used for storing small amounts of non-volatile data in various electronic applications.
2. What are the key features of the 93LC46/P semiconductor?
The 93LC46/P semiconductor features a wide operating voltage range, low power consumption, and a simple two-wire serial interface. Additionally, it offers a high-speed clock frequency and a dedicated write protect pin for added security.
3. How is the 93LC46/P semiconductor typically connected in a circuit?
The 93LC46/P semiconductor is usually connected to a microcontroller or other digital device using a simple two-wire serial interface, consisting of a clock line and a data line. Additionally, it requires connections for power and ground, as well as a write protect pin if needed.
4. What are the typical applications of the 93LC46/P semiconductor?
The 93LC46/P semiconductor is commonly used in applications requiring small amounts of non-volatile memory, such as storing configuration data, calibration values, or user settings in various electronic devices including consumer electronics, automotive systems, and industrial equipment.
5. What are the main advantages of using the 93LC46/P semiconductor in a design?
The 93LC46/P semiconductor offers advantages such as low power consumption, small form factor, ease of integration with microcontrollers, and reliable non-volatile data storage. Its simple two-wire serial interface also simplifies the design of the overall system.
6. How does the 93LC46/P semiconductor handle data retention and endurance?
The 93LC46/P semiconductor is designed to retain data for an extended period without requiring power. Additionally, it has a high endurance for read and write cycles, making it suitable for frequent data updates in various applications.
7. What are the typical operating conditions for the 93LC46/P semiconductor?
The 93LC46/P semiconductor operates within a specified voltage range, typically from 2.5V to 5.5V, and at a recommended temperature range. It is important to adhere to these operating conditions to ensure proper functionality and reliability.
8. Can the 93LC46/P semiconductor be used in automotive applications?
Yes, the 93LC46/P semiconductor is suitable for use in automotive applications, provided that it meets the required specifications for temperature, voltage, and environmental conditions. Its small form factor and low power consumption make it well-suited for automotive electronics.
9. How can the 93LC46/P semiconductor be programmed and erased?
The 93LC46/P semiconductor can be programmed and erased using a simple two-wire serial interface, which allows for easy integration with microcontrollers or other digital devices. Specific commands and protocols are used to write, read, and erase data in the semiconductor.
10. Are there any special considerations for PCB layout when using the 93LC46/P semiconductor?
When designing the PCB layout for the 93LC46/P semiconductor, it is important to consider signal integrity, power supply decoupling, and proper routing of the serial interface lines to minimize noise and interference. Additionally, attention should be given to the placement of the semiconductor within the overall system for optimal performance.
I hope this information is helpful to you.
93LC46/P Связанные ключевые слова
:
93LC46/P Цена
93LC46/P Картина
93LC46/P Напряжение на выводе
Акции: Быстрая проверка котировок
Минимальный заказ: 1
Contains
"93LC"
series
products
